Prodotti visti

DSPA 1500

Amplificatore Professionale da 750w 4 ohm controllato da DSP

  • Progettato con l'efficiente tecnologia in classe D,garantisce alta erogazione anche su 2Ω
  • Perfetto per installazioni fisse.
  • Tramite processore è possibile impostare crossover, equalizzatore, limiter senza l'utilizzo di apparecchiature esterne

Amplificatore Professionale dotato e controllato da DSP

Progettato con l'efficiente tecnologia in classe D,garantisce alta erogazione anche su 2Ω

Perfetto per installazioni fisse - tramite processore è possibile impostare crossover, equalizzatore, limiter senza l' utilizzo di apparecchiature esterne

Stereo: 2x 440Wrms @ 8Ω ~

  • 2x 750Wrms @ 4Ω ~
  • 2x 1200Wrms @ 2Ω

Bridge: 1500Wrms @ 8Ω ~

  • 2400Wrms @ 4Ω

amplificatore discoteca

Perfetto per installazioni fisse(pubs, shops, hotels, restaurants, … ) così come per DJ Set

Il DSP (processore digitale di segnale) comprende:

  • HPF: (40~125Hz) eliminates unwanted, energy absorbing frequencies.
  • LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations.
  • 8 Band parametric EQ: (100Hz~12.5kHz, Q:0.5~5, ±6db) for perfect tuning.
  • 2 Limiters: for increased protection (threshold 0~-12dB).
  • 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel.
  • Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz)
  • 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system)
  • Temperature controlled fan cooling
  • DC fault + high temperature + overload + short circuit protections
  • Balanced XLR + jack inputs with possibility for daisy chaining of several inputs.
  • SpeakON® + bind-post wire terminal outputs

Caratteristiche tecniche:

  • Power stereo 8Ω (1kHz, THD+N 1%): 2x 440Wrms
  • Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms
  • Power stereo 2Ω (1kHz, THD+N 1%): 2x 1200Wrms
  • Power bridge 8Ω (1kHz, THD+N 1%): 1500Wrms
  • Power bridge 4Ω (1kHz, THD+N 1%): 2400Wrms
  • Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): 20-20.000Hz
  • Input sensitivity: +4dBu (1,2Vrms)
  • Input CMMR (1kHz): >50dB
  • Input impedance: 30kΩ Balanced, 15kΩ un-Balanced
  • THD: S/R ratio: >100dB
  • Channel separation 8Ω/1kHz: >70dB
  • Damping factor 8Ω/400Hz: >200
  • Cooling: fan cooling
  • Amplifier type: Class D (switch mode)
  • Power supply type: Switch mode
  • Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks
  • Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output
  • Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut
  • Amplifier working modes: Stereo ~ Bridge ~ Y-mode
  • DSP processing:
  • HPF: 40Hz ~ 150Hz
  • LPF: 6,3kHz ~ 20kHz
  • PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB
  • 2 Clip limiters: 0dB ~ -12dB
  • 2 Delays (time alignment): 0 ~ 20ms (6,86m)
  • X-over (24dB/oct Linkwitz/Riley) : 50Hz ~ 3,15kHz
  • Power Supply: 100~240Vac 50/60Hz
  • Dimensions (mm): 482 x 88 x 280
  • Weigth (kg): 5,2

Più Informazioni

490.00 tasse incluse

In stock

Questo prodotto può essere acquistato con contrassegno

Amplificatore Professionale dotato e controllato da DSP

Progettato con l'efficiente tecnologia in classe D,garantisce alta erogazione anche su 2Ω

Perfetto per installazioni fisse - tramite processore è possibile impostare crossover, equalizzatore, limiter senza l' utilizzo di apparecchiature esterne

Stereo: 2x 440Wrms @ 8Ω ~

  • 2x 750Wrms @ 4Ω ~
  • 2x 1200Wrms @ 2Ω

Bridge: 1500Wrms @ 8Ω ~

  • 2400Wrms @ 4Ω

amplificatore discoteca

Perfetto per installazioni fisse(pubs, shops, hotels, restaurants, … ) così come per DJ Set

Il DSP (processore digitale di segnale) comprende:

  • HPF: (40~125Hz) eliminates unwanted, energy absorbing frequencies.
  • LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations.
  • 8 Band parametric EQ: (100Hz~12.5kHz, Q:0.5~5, ±6db) for perfect tuning.
  • 2 Limiters: for increased protection (threshold 0~-12dB).
  • 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel.
  • Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz)
  • 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system)
  • Temperature controlled fan cooling
  • DC fault + high temperature + overload + short circuit protections
  • Balanced XLR + jack inputs with possibility for daisy chaining of several inputs.
  • SpeakON® + bind-post wire terminal outputs

Caratteristiche tecniche:

  • Power stereo 8Ω (1kHz, THD+N 1%): 2x 440Wrms
  • Power stereo 4Ω (1kHz, THD+N 1%): 2x 750Wrms
  • Power stereo 2Ω (1kHz, THD+N 1%): 2x 1200Wrms
  • Power bridge 8Ω (1kHz, THD+N 1%): 1500Wrms
  • Power bridge 4Ω (1kHz, THD+N 1%): 2400Wrms
  • Power bridge 4Ω (1kHz, THD+NFreq. Resp. (+/-0.5dB): 20-20.000Hz
  • Input sensitivity: +4dBu (1,2Vrms)
  • Input CMMR (1kHz): >50dB
  • Input impedance: 30kΩ Balanced, 15kΩ un-Balanced
  • THD: S/R ratio: >100dB
  • Channel separation 8Ω/1kHz: >70dB
  • Damping factor 8Ω/400Hz: >200
  • Cooling: fan cooling
  • Amplifier type: Class D (switch mode)
  • Power supply type: Switch mode
  • Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks
  • Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output
  • Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut
  • Amplifier working modes: Stereo ~ Bridge ~ Y-mode
  • DSP processing:
  • HPF: 40Hz ~ 150Hz
  • LPF: 6,3kHz ~ 20kHz
  • PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB
  • 2 Clip limiters: 0dB ~ -12dB
  • 2 Delays (time alignment): 0 ~ 20ms (6,86m)
  • X-over (24dB/oct Linkwitz/Riley) : 50Hz ~ 3,15kHz
  • Power Supply: 100~240Vac 50/60Hz
  • Dimensions (mm): 482 x 88 x 280
  • Weigth (kg): 5,2

Path: > > > DSPA 1500